Best old sears table saws
Deal Score0
Deal Score0
Best results for old sears table saws
Milescraft 1407 D/TFeatherBoard Dual or Tandem FeatherBoards for Router Tables and Table or Band Saws
$26.69
$34.96
Last update was on: September 16, 2024 7:00 pm
- An innovative feather board design that provides consistent tension and maximum holding pressure created by unique split rail construction
- Pre-load tension design maintains consistent pressure across face of the feather board
- 2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts
- Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences
Craftsman 22255 Power Tool Switch Key, 2-Pack Genuine Original Equipment Manufacturer (OEM) Part Yellow
$15.56
$19.76
Last update was on: September 16, 2024 7:00 pm
- This part is compatible with models including
- 113243411,113243410,11319771,113239390,11319770,113239392,113221620,113221741,113238180,113221740,113221060,113195250,11329342,113196221,11329580,113196220,113244513,113221611,113243300,113290650,11319761,11320651,11319760,11320650,11323920,11324336,113221610,113241920,113244510,11323800,11323801,113244512,113298360,113298240,11324340,113299210,113228000,113199270,113241691,113199150,113241690,11323930,113238160,113298150,113298030,113298151
Superior Electric SW7B Aftermarket On-Off Toggle Switch 2 Prong For Table Saws and Drill Press Replaces Delta 489105-00 Switch
Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert
$22.99
$27.36
Last update was on: September 16, 2024 7:00 pm
- The Vintage Craftsman insert is blank so you can custom fit the blade slot by passing your blade through it.
- Helps to prevent tear out made from high-density phenolic laminate with a bonded-melamine surface
- Includes side and end adjustment screws
- pre-cut blade bottom pocket
- 14 3/8" X 3 3/4" X 3/32" thick
- Please CHECK the Length, Width and Thickness of your insert before ordering
Or1More Arbor Bearings Sears Craftsman 10" Belt Drive Table Saw Set of 2, 820015
Freud 10" x 40T Thin Kerf General Purpose Blade (LU86R010)
Last update was on: September 16, 2024 7:00 pm
- Premium TiCo HI-Density Carbide General Purpose Blend for Maximum Performance
- Heavy-Duty Thick Kerf and Plate ensure a stable, flat blade for long cutting life ensure a stable, flat blade for long cutting life
- Positive Hook Angles for fast cutting and easy feed
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Singer | Heavy Duty 4432 Sewing Machine with 32 Built-In Stitches, Automatic Needle Threader, Metal Frame and Stainless Steel Bedplate, Perfect for Sewing All Types of Fabrics with Ease
$170.41
$247.09
Last update was on: September 16, 2024 7:00 pm
- HEAVY DUTY METAL FRAME: Adds stability and provides long lasting durability
- SEWING MACHINE ACCESSORIES: A variety of accessories are included: all-purpose foot, zipper foot, buttonhole foot, button sewing foot, seam ripper/lint brush, edge/quilting guide, needles, bobbins, screwdriver, auxiliary spool pin, and spool pin felt are all conveniently located and stored in the accessory tray. A soft-sided dust cover is also included in the packaging
Older Sears/Craftsman Band Saw Zero Clearance Insert 3-3/8" diameter x 3/32" thick – 3 Pack
$9.99
$13.19
Last update was on: September 16, 2024 7:00 pm
- Reduce splintering and tear out on your stock pieces
- Prevent small pieces from falling down in between your blade and the lower wheel
- Replace your old worn out stock insert
- Perfect for scroll work, small delicate pieces, or woods that are prone to tearing out
- This insert comes in packs of 3
Sears 9-10" Flat End Zero Clearance Table Saw Insert by Peachtree Woodworking PW951
Vega U26 Table Saw Fence System: 36-Inch Fence Bar, 26-Inch to Right
Arbor Bearings Sears Craftsman 10" Belt Drive Table Saw Set of 2, 3509
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
$30.34
$33.68
Last update was on: September 16, 2024 7:00 pm
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
Craftsman 10" Contractor Table Saw Metal Handwheel Handle Crank 1/2" Tilt or Elevation Shaft
Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
$29.57
$40.81
Last update was on: September 16, 2024 7:00 pm
- Fits: Delta: Unisaw & LEFT-TILT UNISAW, 10" Contractor,10" Tilt Arbor Saw, "Hybrid" & Left-Tilt Contractor, Grizzly G1023, Jet CTAS-10, Powermatic 63, Sears Craftsman 22104, 22114, 22124, Bridgewood BW10TS, Steel City 35605, 35610, 35670, 35675, 35680, 35685
- Measures: 13-3/8" x 3-3/4" x 1/2" (Please measure before ordering)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
Gadgeter Dual Voltage 20A 110V/220V SAFETY Locking Switch For Table Saw
2 PACK 9" 40 Tooth Carbide Tip General Purpose Wood Cutting Circular Saw Blade with 5/8" Arbor
New WEG 1.5HP Electric Motor Fan Pump Compressor General purpose 56 frame 3430 rpm 1 phase 115/230VAC
Grizzly G2535 Single-Phase Motor with 3450 RPM
$250.95
$316.20
Last update was on: September 16, 2024 7:00 pm
- All our motors are standard NEMA 56 frames and fit over 90% of the woodworking machinery on the market.
- Size: 1-1/2 hip
- Type: Enclosed
- Made to demanding specifications these motors feature the same quality as the motors we install in our heavy-duty machines.