Best ar folding buffer tube
Deal Score0
Deal Score0
Best results for ar folding buffer tube
CZ Scorpion Adapter by Sylvan Arms
$39.99
$53.99
Last update was on: March 28, 2024 11:30 am
- CZ Scorpion Adapter enables the addition of standard aftermarket accessories fitting this thread 1-3/16 x 16
- 6061 T6 Aluminum with Flat Black Anodized Finish
- Works for notch extending
- A 3/16 half dog set screw would be used for proper indexing
- 2 Threaded Alignment Holes
- 100% Satisfaction Guarantee
Magpul Industries USA Mbus Generation Ii Backup Sights Front & Rear Set
$80.55
$98.27
Last update was on: March 28, 2024 11:30 am
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily Activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc
- Clamps to any MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons
- NOT for railed gas Blocks
Otis Technology .223cal/5.56mm Cleaning System
$41.75
$56.36
Last update was on: March 28, 2024 11:30 am
- Cleans .223cal/5.56mm rifles
- 100% cotton 2” patches and small slotted tip
- .223cal/5.56mm bronze bore brush and Mongoose G2 combo swab/brush with size marked on brush stem (2 each included)
- 8” and 30” aircraft grade Memory-Flex cables for proper Breech-to-Muzzle cleaning
- Small obstruction remover knocks out mud, snow, stuck casings and doubles as a t-handle base for included t-handle
- B.O.N.E. Tool quickly and effectively scrapes carbon from bolt, bolt carrier and firing pin
Magpul MBUS Front & Rear Flip Up Backup Sight GEN 2-247-248 – Flat Dark Earth
$81.00
$119.07
Last update was on: March 28, 2024 11:30 am
- Polymer
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard A2 irons
BLACKHAWK! 74SG36BK Carbine Case 36"
$38.53
$49.32
Last update was on: March 28, 2024 11:30 am
- Constructed of tight-weave, heavyweight 600 denier polyester with thick PVC Laminate for stability
- Soft internal fabric protects firearm finish
- Dual-density foam design incorporates internal open-cell foam to protect firearm and external closed cell foam for shock Absorption
- Heavy-duty tactical webbing on shoulder straps and contact points
- Closure features a loop on the case to lock the zipper pull together for a lockable case
Ohuhu 6-9 Inches Tactical Rifle Bipod Adjustable Spring Return for Hunting Shooting, Upgrade
$15.29
$22.63
Last update was on: March 28, 2024 11:30 am
- ✔ ADJUSTABLE 6''-9'': Leg length can be adjusted from 6 inches to 9 inches (5 settings) with return springs and leg release buttons
- ✔ EASY TO USE: Quickly attach or detach from the rifle by using a swivel stud (not included)
- ✔ STEADY: This bipod does not have swivel top and does not tilt from side to side
- ✔ PREMIUM MATERIAL: Made of hardened steel and aluminum, non-rusting black anodized finish, the rifle bipod is duty and lightweight
Blade Tech Revolution AR-15/M4 Single Mag Vertical Pouch with Tek Lok for Right Hand (Black)
CVLIFE 6-9 Inches Tactical Rifle Bipod Adjustable Spring Return with Adapter
$18.99
$27.73
Last update was on: March 28, 2024 11:30 am
- With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
- Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
- Adjustable leg length: 5 settings for different length, the bipod is ready to meet your needs.
- Quickly attach to or detach from the rifle using existing swivel stud.
- Foldable arms with spring tension control. Come with the mount adapter.
Ozark Armament 45 Degree Offset Backup Iron Sights for Railed Rifles Picatinny Mount
$32.95
$37.89
Last update was on: March 28, 2024 11:30 am
- Don't let optic failure take you out of the fight
- Doesn't interfere with your optic sight picture
- Allows quick, repeatable transition from primary optic
- Standard height above bore as standard iron sights
- Backed by our full One Year Warranty and Dedicated US Support
NcSTAR VISM CVSHMR2957T Roll Up Shooting Mat, Tan
$29.95
$38.94
Last update was on: March 28, 2024 11:30 am
- Elbow and Knee slip resistant panels
- .30" of padding to make shooting from the prone position on the ground more comfortable
- Rolls up into a compact size: 19.5 w x 8.5 H. Two hook and loop straps secure the Shooting mat into a roll
- Carry handle and an adjustable shoulder strap. Shoulder strap can serve Double duty to help secure your firearm Bipod in place, preventing the rifle from moving forward under recoil
LimbSaver Snap-On Recoil Pad for 6-Position Adjustable Stocks
$32.26
$42.26
Last update was on: March 28, 2024 11:30 am
- Snaps onto most six-position adjustable stocks
- Reduced felt recoil by up to 60 percent
- Reduces muzzle jump allowing for faster target re-acquisition
- Helps keep rifle securely positioned against your shoulder
- Made from LimbSaver's proprietary NAVCOM material to dampen vibration
Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance
$17.19
$23.89
Last update was on: March 28, 2024 11:30 am
- DIMENSIONS: 1 1/4" H x 4" Diameter
- EASE OF USE: Two-sided tool features all channels and holes needed to add or remove parts from most handguns
- VERSATILITY: Works perfectly for assembling and disassembling 1911s as well as 10/22s
- NON-DESTRUCTIVE: Constructed of non-marring urethane
- INCLUDES: Features a main spring removal recess, barrel link removal V channel, rear sight drift channel, front sight stalking channel, hammer and sear pin removal holes, ejector port dressing channel and a rail dressing round bottom channel
Foamrest Rifle and Pistol Shooting Block Bench Rest (2 Pack)
$26.99
$38.33
Last update was on: March 28, 2024 11:30 am
- V-Block design shooting rest with variable height positions for both front and rear firearm support
- American made. Proprietary lightweight, durable, closed-cell foam blend
- UV and Water Resistant material for many rounds of trouble free use
- Fits most firearms for either semi or fully supported shooting
- Recoil absorbing material for improved accuracy and follow up shots. Very stable and great for the range both indoors and out as well as hunting
CVLIFE 6-9 Inches Tactical Rifle Bipod Adjustable Spring Return with 360 Degree Swivel Picatinny Adapter
$18.99
$26.78
Last update was on: March 28, 2024 11:30 am
- Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight
- The head of the bipod could 360 degree swivel. After installing it to the rilfe, you could adjust your rifle to different angles easily if needed.
- With the spring on both legs, you could fold the legs up easily and keeping silent when hunting.
- 5 settings of leg length. It can be adjusted from 6 inches (152mm)to 9 inches(225mm). Slightly pressing the button, you could adjust the length to meet different needs when hunting.
Bushnell Optics TRS-25 Hirise 1x25mm Red Dot Riflescope with Riser Block, Matte Black
$74.99
$88.49
Last update was on: March 28, 2024 11:30 am
- Beautiful design and durability built to last
- Lightweight 6.0 ounce 3 MOA HiRise Red Dot Riflescope
- 11 brightness settings provide optimum illumination in any light condition
- Includes integral mount and protective lens cover
- Conserves battery life by self regulating brightness based on available light and power down when the protective storage hood is attached