homehealthfamily 
Best results for craftsman 10 inch table saw blades
FREUD D1060X ATB Fine Finish Saw Blade
IRWIN Tools Classic Series Carbide Table / Miter Circular Saw Blades, 10-Inch, 24T (15070)
$17.99
$22.67
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- Precision-ground teeth allow for smooth, accurate cuts.
- Fully hardened plate runs truer longer. Heavy-gauge high-carbon steel for extended life.
- Features a 5/8-Inch Universal Arbor.
- 24 tooth count blades are ideally suited for trim and finish jobs.
Freud 10" x 50T Thin Kerf Combination Blade (LU83R010)
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- 10" Blade Diameter, 50 Teeth, COMB Grind, 5/8" Arbor, .091" Kerf, 10° Hook Angle
- Premium TiCo HI-Density Carbide Combination Blend for Maximum Performance
- Thin Kerf requires less power and allows for faster feed rate
- Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Freud 10" x 30T Industrial Thin Kerf Glue Line Ripping Blade (LM75R010)
$53.52
$78.67
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- 10" Blade Diameter, 30 Teeth, TCG Grind, 5/8" Arbor, .091" Kerf, 12° Hook Angle
- Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
- Thin Kerf requires less power and allows for faster feed rate
- Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Amana Tool Mamba Series MA10024 Thin Kerf Ripping 10-Inch x 24 Tooth x ATB+F Grind 5/8-Inch Bore Saw Blade
$33.80
$46.98
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- Ripping: Rips Wood
- 10-Inch x 24 Teeth, ATB+F Grind, 5/8-Inch Bore, 20-Degree Hook Angle
- Features thin-kerf design requiring less horsepower and hollow ground teeth that provide sharper cuts and extended blade life
- Specially Designed for Contractors
- Covered by Amana Tool's Lifetime Guarantee against saw blade material and workmanship defects, subject to guidelines
Freud 12" x 30T Thin Kerf Rip Blade (LU87R012)
$54.64
$66.11
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
- Thin Kerf allows for faster feed rate and reduced waste
- Positive Hook Angles for fast cutting and easy feeding in ripping applications
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Bosch DB1041S 10-Inch Segmented Rim Diamond Blade
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
$30.95
$34.05
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
DEWALT DW745 10-Inch Compact Job-Site Table Saw with 20-Inch Max Rip Capacity, Corded 120V AC
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- 22 kg unit weight and optimised footprint make this the most portable saw in its class. Shoe bevels 0° to 45° for beveled cuts
- Steel roll cage protects saw against jobsite drops and impacts, Rack and pinion fence system, front and rear fence lock and large, clear scales combine to give an extremely accurate and easy to use saw
- Powerful 1850 Watt motor for high performance in all applications (1300 Watts 110 version for UK Only)
WEN 3962 Two-Speed Band Saw with Stand and Worklight, 10"
$275.73
$314.33
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
- Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
- Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
- Operates at two speeds of either 1520 or 2620 FPM.Dimensions of the stand: 13 3/4 L x 15 3/4 W x 25 1/4H (Inches)
- Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)
Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick
- For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 5,500
- Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood.
- Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required.
Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade
$33.00
$44.55
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
- Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
- Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness
- Fine Crosscutting
- Ideal for: Harwood, Softwood, and Plywood
FREUD D1090X Circular Saw Blade
Diablo D1050X Combination Saw Blade
CMT 256.050.10 ITK Industrial Combination Saw Blade, 10-Inch x 50 Teeth 1FTG+4ATB Grindwith 5/8-Inch Bore
$43.64
$56.73
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.
- Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.
- 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind.
- Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products.
- Laser-cut plate features expansion slots to reduce noise and anti-vibration design.
DEWALT DWE7491RS 10-Inch Jobsite Table Saw with 32-1/2-Inch Rip Capacity and Rolling Stand
2 PACK 9" 40 Tooth Carbide Tip General Purpose Wood Cutting Circular Saw Blade with 5/8" Arbor
Forrest 10" 20T WWII Rip Blade Alt Top Raker .125 Kerf
IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 10-Inch, 24T (14233)
$22.98
$32.63
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- 10" X 24 tooth Marathon circular saw blade
- This product is highly durable
- This product is manufactured in China
- Silicone coat allows the blade to slice easier through material reducing pitch and resin buildup when cutting pressure-treated lumber.
- Construction-grade carbide teeth deliver longer blade life. Every other tooth is thinner for faster cuts.
- The innovative heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Plate is fully hardened to run truer, longer.
TWIN-TOWN 8-1/4-Inch Saw Blade, 60 Teeth,General Purpose for Soft Wood, Hard Wood, Chipboard & Plywood, 5/8-Inch DMK Arbor
$14.59
$17.95
Amazon.com
Last update was on: July 4, 2024 4:37 pm
- Real industry quality level with elegant and simple design, C4 construction grade tungsten carbide teeth provide maximum resistance for 3X longer life
- Ideal for ripping & crosscutiing in softwood, hardwood, chip board and plywood with fine finishing
- For use on Circular Saws, Miter Saws and Table Saws, Max RPM 7,000
- 2.0mm thin kerf design for fast cut and smooth cutting action allows extremely durable with minimal material waste
