homehealthfamily 
Best results for dremel bit metal cutting
Dremel EZ688-01 EZ Lock Mini Cutting Kit for Metal and Plastic
Dremel 561 Multipurpose Cutting Bit
Dremel 426B 20 Piece 1-1/4-Inch Reinforced Rotary Tool Cut-Off Wheels
$21.72
$24.33
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- Ideal for cutting, grooving and trimming all kinds of metal. May also be used on other materials-including thin wood, plastics and ceramics
- Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver
- May also be used on other materials including thin wood, plastics and ceramics
Dremel EZ541GR EZ Lock Grinding Wheel – Metal
$9.97
$11.37
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- Comprehensive offering for general purpose to specialized high performance applications
- Consistent performance from wheel to wheel through superior manufacturing processes Tested for balance
- This product is made of high quality material
Dremel 543 1-1/4 inch Cutting/Shaping Wheel
$12.68
$16.74
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- N/A
- Importado
- Comprehensive offering for general purpose to specialized high performance applications
- Consistent performance from wheel to wheel through superior manufacturing processes Tested for balance
- This product is made of high quality material
- Use the edge of the wheel for cutting and slotting.
Dremel EZ476 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheels For Plastic – 5 pack
$8.30
$9.63
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- N/A
- Hecho en EE. UU. o importado
- The first cut-off wheel designed specifically for cutting plastic
- Cut-off wheels last 2 times longer than current fiberglass- reinforced cut-off wheels
- Compatible with all Dremel rotary tools
- Cut-off wheels labeled for easy identification
Dremel 9909 Tungsten Carbide Cutter
$6.90
$9.94
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- The product is 1/8" Diameter, Tungsten Carbide Cutter
- Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
- A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.
- Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit
Dremel 9901 Tungsten Carbide Cutter
Dremel 9904 Tungsten Carbide Cutter
$7.64
$9.63
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- Use on Hardened steel, fired ceramics and other hard materials
- 1/8" Maximum cutting head
- 1/8" Shank
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit
- Secure objects to a stable surface while working
Dremel 9910 Tungsten Carbide Cutter
$8.99
$10.25
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- The product is 1/8 Inch Diameter, Tungsten Carbide Cutter
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- Secure objects to a stable surface while working
- Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure
- Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics
Dremel 9906 Tungsten Carbide Cutter
$5.00
$5.80
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- The product is 1/8" Diameter Tungsten Carbide Cutter
- Use for shaping, smoothing and material removal
- For use on hardened steel, stainless steel, cast iron, ceramics, hardwoods and other hard materials
- Do not run in excess of 30,000 RPM
Dremel 9933 Structured Tooth Tungsten Carbide Cutter
$8.68
$10.94
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- The product is 5/16" Tung Carb Cutter
- Teeth made of tungsten carbide, the hardest material next to diamonds
- For fast material removal on fiberglass, wood, plastic, epoxy
- Also great on rubber, laminates, particleboard, soft metals, and ceramic wall tile
Dremel 420 Heavy Duty Cut-Off Wheels .040" thick, 20 Pack
Dremel 4000-2/30 120-Volt Variable Speed Rotary Tool Kit – Corded
$69.88
$83.16
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- Variable speed from 5,000 to 35,000 RPM
- easy-to-understand speed dial features
- Compatible with all Dremel accessories and attachments
- Includes 30 Dremel accessories and 2 Dremel attachments
- 360-degree grip zone for control in any position. Cord Length:: 6ft
- Carrying case is included
Dremel 409 Cut-off Wheels .025" thick, 36 Pack
Dremel 565 Multi-Purpose Cutting Kit
$15.97
$18.37
Amazon.com
Last update was on: April 26, 2024 2:52 pm
- N/A
- Imported
- Includes cutting guide, 2-No. 560 drywall cutting bits and 1-No. 561 multipurpose cutting bit
- The Multipurpose Cutting Kit allows for sturdy, controlled cuts in a variety of materials including: wood, ceiling tiles, drywall, laminate, fiberglass, plastic and vinyl siding.
- Cutting guide allows for a sturdy controlled cut with maximum visibility, and has easy depth adjustment.
- Rotary tool not included.
