homehealthfamily 
Best results for drill press coolant pump
LITTLE GIANT VMC-1 Machine Coolant Tank System
$181.09
$213.69
Amazon.com
Last update was on: October 3, 2023 10:22 am
- 115 v, 108 gph at 1-foot
- The flow of coolant liquids can be regulated to any desired amount or completely shut off without harmful effects to the motor
- Tanks are made of oil resistant polyethylene
- Screen chip collector is easily removed for fast cleaning
- Designed for use with drill presses, tool grinders, tapping machines, cut-off saws, bench mills, and lathes
【The Best Deal】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
$18.95
$21.98
Amazon.com
Last update was on: October 3, 2023 10:22 am
- √ Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- √ Working Safer - Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up.
- √ Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
- √ Easy To Use - Air flow and spray mist volume adjustable design, easier to use.
Little Giant 500203 Lubricated Pump, Permanently Oiled Direct Drive Pump, 1-A 170 GPH
$67.59
$89.22
Amazon.com
Last update was on: October 3, 2023 10:22 am
- SUBMERSIBLE PUMP: This Compact 170 Gph Pump features a 1/4" Mnpt Discharge, 7' shut-off head capability and screened inlet. This pump is not recommended for aquariums, swimming pools and fuel oil transfer
- IMPEDANCE PROTECTION: This pump is Impedance protected and it has maximum lift to 7-ft. Bottom inlet has snap off screen for easy cleaning. It has 1/4" MNPT outlet, with 90-Degree elbow accessory, and accepts 1/2" I.D. tubing
ChgImposs Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill
$31.96
$38.03
Amazon.com
Last update was on: October 3, 2023 10:22 am
- Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft
- Flexible Pipe Diameter: 4mm / 0.16in
- Stainless steel flexible pipe is more resistant to high temperatures.
- Air flow and spray mist volume adjustable design, easier to use.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure)
Metal Cutting Engraving Machine Mist Cool Coolant Lubrication Spray System for Air Pipe CNC Lathe Milling Drill for Cooling Sprayer Machine
$22.99
$31.50
Amazon.com
Last update was on: October 3, 2023 10:22 am
- 1. Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled
- 2. Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up
- 3. The nebulizer gas and coolant is adjustable, easy to use on different processing conditions
- 4. Even the super-hard alloy precision machining the workpiece can achieve a smooth surface
CUTit Multipurpose Cutting, Drilling, Tapping, Threading and Machining Oil
$30.00
$41.70
Amazon.com
Last update was on: October 3, 2023 10:22 am
- Extremely durable synthetic additives
- Excellent anti-weld and cooling properties, protects tools and dies from premature wear
- Acts as an excellent rust and corrosion inhibitor
- For use in: Cutting, milling, drilling, threading & tapping, turning and more
- For use on both ferrous and non-ferrous metals
ChgImposs Mist Coolant Mist Lubrication System Unit, Metal Cutting Engraving Cooling Sprayer Machine with Air Pipe for CNC Lathe Milling Drill Machine
$9.96
$12.95
Amazon.com
Last update was on: October 3, 2023 10:22 am
- Whole Length: 350mm / 13.78in
- Cardan Joint Diameter: 5mm / 0.2in
- Extend the live of the machine, update the precision of processing. Decrease the fee of the operation and effect of process.
- Can save the cooling liquid in the range of 80%, good cooling effect. Can decrease the liquid waste which influence the circumstance.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
Cutting Cooling Mist Coolant Lubrication Spray System Sprayer Metal Hose for Metal CNC Router Cutting Engraving Lathe Milling Machine
$49.98
$69.97
Amazon.com
Last update was on: October 3, 2023 10:22 am
- This product has obtained the national patent, widely used in CNC lathe, general lathe, drilling machine, tapping machine, grinding machine, tool grinding machine, NC, CNC machine, punching machine, sawing machine, milling machine
- Cooling the processing solution can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- Gas processing debris was blown away, processing more secure.
Huanyang Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz ER20 Collet for Engraving Machine
$215.98
$244.06
Amazon.com
Last update was on: October 3, 2023 10:22 am
- The item is Water Cooled 220V-2.2KW 4 bearings Φ80mm 400hz spindle motor.(come with a 6mm collet)
- NOTE:Need to be equipped with frequency converter to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle
- stable performance,high precision bearing
- operating speed:6000rpm-24000rpm
- Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
Drilax 1 1/2 Inch Diamond Hole Saw Drill Bit Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain, Coated Core Bits Holesaw DIY Kitchen, Bathroom, Shower, Faucet Installation Size 1-1/2" Inches
$9.99
$13.69
Amazon.com
Last update was on: October 3, 2023 10:22 am
- HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 1-1/2 inches Diameter
- STANDARD 3/8 inch Shank Use with and standard electric or battery drill.
- PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain
- SAVE OVER 80 Percent for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects
- Use water as coolant to prolong the tool life, these tools do not need a center pilot drill.
Drilax 1 3/16 Inch Diamond Hole Saw Drill Bit Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain, Coated Core Bits Holesaw DIY Kitchen, Bathroom, Shower, Faucet Installation Size 1 3/16" Inches
$9.99
$11.59
Amazon.com
Last update was on: October 3, 2023 10:22 am
- HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 1 3/16 inches Diameter
- STANDARD 3/8 inch Shank Use with and standard electric or battery drill.
- PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain
- SAVE OVER 80 Percent for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects
- Use water as coolant to prolong the tool life, these tools do not need a center pilot drill.
Loc-Line Coolant Hose Assembly Kit, Acetal Copolymer, 7 Piece, 1/4" Coolant Hose ID
$8.24
$11.70
Amazon.com
Last update was on: October 3, 2023 10:22 am
- Kit of 7 acetal copolymer modular hose components includes 2 hose segments, 3 round nozzles, and 2 NPT connectors
- Components attach to each other by the Loc-Line ball-and-socket design, and the NPT connector has one end threaded for connecting to NPT pipe
- Acetal copolymer plastic resists corrosion and moisture, and can be used with acetone, alcohol, ethyl, greases, oils, commercial dish detergents, gasoline, lacquer solvents, and sodium hydroxide
