homehealthfamily 
Best results for gear drive drill press
WEN 4225 8.6-Amp Variable Speed Floor Standing Drill Press, 15-Inch
$541.71
$769.23
Amazon.com
Last update was on: December 4, 2023 10:06 am
- 4-inch stroke makes drilling through 4x4 boards easier than ever
- Adjust the variable speed anywhere from 280 RPM to 3300 RPM
- Includes a built-in work light, a precision laser, a 5/8 inch chuck, and onboard chuck key storage
- 12-inch by 12-inch cast iron work table pivots up to 45 degrees in both directions
- Backed by a 2-year warranty, a friendly customer service line and a nationwide network of skilled technicians
Milescraft 1304 Drill90PLUS – Right Angle Drill Attachment
$19.97
$29.76
Amazon.com
Last update was on: December 4, 2023 10:06 am
- Compatible with most drill Accessories up to 3/8”
- Designed with a minimum reach of only 4”
- Handle length of 4.25” for complete control
- 6-Sided hex shank
- Constructed with steel gears, 3 different types of bearings and integrated gear support
Hougen HMD927 Automatic Feed Magnetic Drill – 2 Speed 250 and 450 RPM/Integrated Coolant Bottle – 115V
$1,525.00
$2,165.50
Amazon.com
Last update was on: December 4, 2023 10:06 am
- ✔️The Hougen HMD927 is a powerful two speed power feed mag drill with great power to weight ratio, Large 1-5/8" x 2" capacity.
- ✔️Powerful high torque Hougen motor and gears, Two Speed gearbox - 250 and 450 RPM.
- ✔️Pilot light for low light conditions and greater hole accuracy, Smart technology optimizes feed rate for increased tool life and excellent hole quality. Single handle to engage power feed system, Selectable manual/power feed mode.
Hitachi DS10DFL2 12-Volt Peak Cordless Lithium Ion Compact Drill Driver Kit (Lifetime Tool Warranty)
$91.97
$126.92
Amazon.com
Last update was on: December 4, 2023 10:06 am
- Covered by Hitachi's Lifetime Lithium Ion Tool Warranty & 2-Year Lithium Ion battery warranty
- Impressively lightweight at 2.2 lbs reduces fatigue during extended or elevated use
- 300 in/lbs of torque to handle tough jobs in tight spaces
- Two-speed gear setting to match the appropriate speed to the application
- 21+1 clutch with 21 torque settings and a drill mode for ultimate precision and control
- Optimized handle dimensions for a secure grip and ergonomic comfort in all hand sizes
VFD CNC Spindle Motor Kits：220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe (Factory Direct Sales)
$382.98
$451.92
Amazon.com
Last update was on: December 4, 2023 10:06 am
- NOTE:spindle need to be equipped with this vfd to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle and vfd DOES NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized).
- This package includes： 1 x 220V-2.2KW VFD,1 x 220V-2.2KW Φ80mm 4bearings 24000RPM ER20 collet Water Cooled Spindle Motor, 1 x 220V-75W Water Pump .1 x 80mm motor clamp mount 1 x 5m Water Pipe.
Syntus 63 in 1 Precision Screwdriver Set with 57 Bit Magnetic Screwdriver Kit Electronics Repair Tool Kit for iPhone, Tablet, Macbook, Xbox, Cellphone, PC, Game Console, Black
$14.99
$16.64
Amazon.com
Last update was on: December 4, 2023 10:06 am
- Update with a piece of triangle plectrum, plastic opening tool and a bit for disassembling the mainboard of iPhone.
- 57 differrent bits elaborated by Syntus to repaire smartphones, tablets, and PCs including iPhone, iPad, MacBook Air, and MacBook Pro, as well as gaming consoles and controllers from Nintendo, PlayStation, or XBox.
- A flexible shaft included is perfect for electronics where the shaft is hard to get.
ARES 70028 | SAE Impact Magnetic Nut Driver Set | 2 1/2-inch Impact Grade Nut Setter with Industrial Strength Magnet
$11.92
$15.50
Amazon.com
Last update was on: December 4, 2023 10:06 am
- SET INCLUDES: The ARES SAE Impact Magnetic Nut Driver Set includes 1/4-inch, 5/16-inch, 3/8-inch, 7/16-inch and 1/2-inch nut drivers with a high quality reusable storage rail.
- ITEM SPECIFICATIONS: These magnetic nut drivers are made of chrome vanadium and have a 1/4-inch hex shank that fits any standard drill chuck. The impact nut drivers are 2.5 inches (65mm) long and have an extra strength magnet for superior bit retention.
Dremel GO-01 4V Max Cordless Screwdriver with USB Charger
$39.97
$54.76
Amazon.com
Last update was on: December 4, 2023 10:06 am
- 4V max - Lithium-Ion battery always ready for use
- USB charger - for fast and convenient charging
- Push and go - starts with a simple push, intuitive to use
- Superior torque - 360 RPM to drive screws 2x faster than comparable products in the market
- Overdrive protection - prevent damaging surfaces and stripping the hole
- Battery charge indicator - displays the charge level while the tool is on and in operation
Hougen HMD917 115-Volt Swivel Base Magnetic Drill 2 Speed/Coolant Bottle Plus 1/2" Drill Chuck Adapter Plus 12002 Rotabroach Cutter Kit Our Most Powerful Two Speed Mag Drill for Heavy Duty Fabrication
$1,734.00
$2,219.52
Amazon.com
Last update was on: December 4, 2023 10:06 am
- ✔️The HMD917S Swivel Base is our most powerful two speed mag drill for heavy duty fabrication.
- ✔️Large 2-3/8" x 3" capacity, Our most powerful high torque Hougen motor and gears.
- ✔️Two speed gearbox - 250 & 450 RPM, Pilot light for low light conditions and greater hole accuracy. Two stage magnet - 30% increase in power when motor is turned on.
- ✔️Positive slug ejection, Integrated coolant bottle, Feed handles quickly change from side to side, Lift detector safety system, Rear mounted controls.
Ghost Controls TSS1XP Heavy-Duty Solar Single Automatic Gate Opener Kit for Swing Gates Up to 20 Feet (ft.)
$579.00
$781.65
Amazon.com
Last update was on: December 4, 2023 10:06 am
- Quiet and Fast Post Mount Do-It-Yourself (DIY) Gate Opener Kit for Single Vehicular Swing Gates including a 10W Solar Panel
- Lifetime Warranty on Motor and Gear Assembly. 18 Month Warranty of remaining parts, can be extended to 24 months when registered online. Not intended for use on solid-panel gates.
- Requires 12V battery (not included), Solar Power Capable with included 10W Solar Panel. Optimized for Tube Gates and is perfect for any swing gate up to 20 ft. including tubular, decorative, ornamental, chain link, or plantation gates. Requires AXPO Push-To-Open Bracket Kit (sold separately) for push-to-open installations.
RAM 3004.5068 White 3,500 lb. Electric Trailer Jack with Drop Leg
$119.00
$139.23
Amazon.com
Last update was on: December 4, 2023 10:06 am
- Bright LED light for easy night time hookup
- Include a drop leg for 7-1/2" of additional adjustment
- Durable hardened steel gears for year and years of normal use
- Crank handle for manual override in case of power loss
- Setup for 12 volt battery use
Swpeet Powerful Speedy Hand Drill 1/4-Inch Capacity with 13Pcs Drill Bit Set, Mini Hand Drill Manual ¼ inch with Finely Cast Steel Double Pinions Design, Chucks and Grip Handle for Woods, Plastics
$23.86
$32.21
Amazon.com
Last update was on: December 4, 2023 10:06 am
- ❤ WHAT YOU GET --- A perfect Hand Drill Tool and A Chuck Key, Meanwhile We have prepared 13Pcs different Sizes Drill Kits. Manual powered machine works with ¼ inch bits(0.6mm - 6mm), to satisfy the versatility you crave. With double Pinions running very strong, this steel cast construction hand drill with comfortably smooth abs engineering plastics handle will never let you down.
- ❤ WITH PERFECT DRILLS BIT SET --- High Speed Steel, Classic high speed steel construction with titanium coating for proven capability and durability . We have prepared 13Pcs drill bit set，they size are 40mm, 46mm,52mm,61mm,63mm,71mm,73mm,81mm,83mm,85mm,91mm,92mm,98mm. So many different sizes can meet all your needs
A.O. Smith GF2024 Century Resilient Base Split Phase Electric Motor, 115 Vac, 5.4 A, 1/4 Hp, 1725 Rpm
back to menu ↑RS-550s 18v (6v – 24v) DC Motor – Round Shaft High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicles, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine & More
$16.99
$20.56
Amazon.com
Last update was on: December 4, 2023 10:06 am
- RS-550s Brushed DC Motor Weight: ~7.7oz (218g) Body Length: 2.24in (57mm) Body Diameter: 1.46in (37.5mm)
- Operating Voltage: ~6v - 24v | Optimal Volt Range: 12v - 18v | 18 Volt Nominal (Optimal Power, Speed, and Torque near 18 volts)
- Shaft Length ~0.35 inch / ~11/32in or ~9mm | Diameter ~0.125 inch / 1/8in or ~3.175mm | Style: Round | Stall Current: ~85A | Efficiency: ~70% | No Load RPM: ~20000 rpms | RPM Peak Efficiency: ~17000 rpms
Stens 150-435 Flywheel Ring Gear Briggs & Stratton 696537 399676 392134
BRONZE GEAR FOR 4 X 6 METAL CUTTING BAND SAW
Steelbody Deluxe 6 Position Utility Weight Bench for Weightlifting and Strength Training STB-10105
$175.99
$202.39
Amazon.com
Last update was on: December 4, 2023 10:06 am
- Strength TRAINING – the Steelbody deluxe utility bench is an exercise bench that can be used for lifting weights and strength training. The platform can be used for arm lifting exercises, back training, ab workouts, and bench presses, and other workouts
- Full body workout – perfect for beginners and long-time trainers, this unit provides an effective workout for the whole body. This versatile bench can be used to train different parts of your physique such as the chest, core, and upper and lower limbs
Bastex Universal Socket Multi-Function Hand Tool Set with Drill Adaptor 3/8" drive fits 1/4" to 3/4" (7-19mm) for multi-purpose use
$12.99
$19.36
Amazon.com
Last update was on: December 4, 2023 10:06 am
- Professional grade universal socket wrench
- Grip self adjusting universal socket
- Automatic standard and metric application
- Power drill adapter included
- The only socket tool that will work for both SAE and metric, cup hooks, screw eyes, threaded hooks.
Grizzly G0613 Swivel Metal-Cutting Bandsaw, 7 x 8-1/4-Inch
Amazon.com
Last update was on: December 4, 2023 10:06 am
- This saw is built for accuracy and production. Easy angle set-ups between 0 and 60 degrees means no wasted time between cuts
- Lever controlled blade guide locks allow adjustments right up to the work piece for optimum support and the blade guides have fully adjustable ball b
- And when you're done use the quick release lever and stock length stop to get on with the next cut
