homehealthfamily 
Best results for inexpensive cnc milling machine
Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm
$239.99
$323.99
Amazon.com
Last update was on: September 25, 2023 5:39 am
- New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
- Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
- Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
【The Best Deal】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
$18.95
$23.12
Amazon.com
Last update was on: September 25, 2023 5:39 am
- √ Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- √ Working Safer - Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up.
- √ Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
- √ Easy To Use - Air flow and spray mist volume adjustable design, easier to use.
Huanyang Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz ER20 Collet for Engraving Machine
$215.98
$244.06
Amazon.com
Last update was on: September 25, 2023 5:39 am
- The item is Water Cooled 220V-2.2KW 4 bearings Φ80mm 400hz spindle motor.(come with a 6mm collet)
- NOTE:Need to be equipped with frequency converter to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle
- stable performance,high precision bearing
- operating speed:6000rpm-24000rpm
- Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
Genmitsu CNC 3018 Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine
$189.99
$224.19
Amazon.com
Last update was on: September 25, 2023 5:39 am
- Generous Working Area: With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8"), the Genmitsu can easily accommodate most projects.
- Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
- Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
HFS (R) 58pc 5/8" Slot 1/2"-13 Stud Hold Down Clamp Clamping Set Kit Bridgeport Mill
BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks
ABN Machinist Thin Parallel Bars 20-Piece Tool Set 1/8in x 6in – Straightedge Bar Blocks – 1/2in to 1-5/8in Block Pairs
$39.99
$48.79
Amazon.com
Last update was on: September 25, 2023 5:39 am
- PRECISE MACHINING: Use the ABN Machinist Thin Parallel Bars 20-Piece Tool Set 1/8” x 6” Inch – Straightedge Bar Blocks – 1/2" to 1-5/8” Block Pairs for any machining, especially smaller workpieces
- Use on a jig or drill press for milling work and other projects
- VARIOUS SIZES: This package includes 10 pairs of 1/8-inch x 6-inch (0.3cm x 15.2cm) parallel bars with the following heights: 1/2-inch, 5/8-inch, 3/4-inch, 7/8-inch, 1-inch, 1-1/8-inch, 1-1/4-inch, 1-3/8-inch, 1-1/2-inch, and 1-5/8-inch
HFS (R) Coaxial Centering Indicator Co-Ax Precision Milling Machine Test Dial CNC
$72.99
$91.24
Amazon.com
Last update was on: September 25, 2023 5:39 am
- 23 holes includes (5) 5/8-11 threaded holes for clamping and (18) untapped holes
- Quick, accurate, easy centering in boring and milling set-up on horizontal or vertical machines.
- Operate at an angle from horizontal to vertical machines and from internal to external diameter without any change by simply changing the feeler.
- The face of the indicator remains stationary at any desired position while the machine spindle rotates, leaving the operator with both hands free to accurately position the table.
HQMaster CNC Router Bits 1/8 Router Bit Straight Router Bit 1 8 Shank Straight Flute End Mill Cutter 2-Flute Milling Cutting Tungsten Steel 22mm CEL/45mm OAL for MDF PVC Acrylic Chipboard Wood 10 Pack
$19.99
$29.19
Amazon.com
Last update was on: September 25, 2023 5:39 am
- Wide range of processing ---- for cutting/engraving/carving/grooving/slotting/drilling/hollowing/positioning/roughing /milling in materials like MDF, PVC, Acrylic, wood, solid wood, chipboard, composite board, organic board, core board, density board etc.
- Dimensions ---- shank diameter (SD): 1/8" (3.175mm)
- cutting edge diameter (CED): 1/8" (3.175mm)
- cutting edge length (CEL)/flute length: 22mm
- overall length (OAL): 45mm
CUTit Multipurpose Cutting, Drilling, Tapping, Threading and Machining Oil
$30.00
$42.60
Amazon.com
Last update was on: September 25, 2023 5:39 am
- Extremely durable synthetic additives
- Excellent anti-weld and cooling properties, protects tools and dies from premature wear
- Acts as an excellent rust and corrosion inhibitor
- For use in: Cutting, milling, drilling, threading & tapping, turning and more
- For use on both ferrous and non-ferrous metals
HFS (R) 3" PRECISION GRINDING SCREWLESS MINI INSERT VISE TOOLMAKER STEEL .0002"
Nema23 57 Stepper Motor Mount bracket Support Clamp Aluminium Alloy Mounting Holder for CNC Router Milling Engraving Machine
4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8" (3.175mm) Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated
$28.88
$37.54
Amazon.com
Last update was on: September 25, 2023 5:39 am
- Brand name: JERRAY / Tapered Ball Nose End Mill / Cone Cutters
- Flutes: 2 Flutes / Tip Radius:0.25mm ,0.5mm,0.75mm,1.0mm
- Per Side Angle =5.09° / 4.15° / 3.20° / 2.25°(Approx.) (B)
- Shank Diameter: 3.175mm ((d1) / Cutting Length: 15mm(L1)
- Overall Length: 40mm(L) / Material hardness:0~hrc55
POWERTEC 71082 T-Track Mini Hold-Down Clamp, 3-5/8" L x 3/4" W
$8.93
$11.43
Amazon.com
Last update was on: September 25, 2023 5:39 am
- INCLUDES: (1) Hold Down Clamps for T-Tracks/T-Slots
- FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies
- FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity
- DESIGN: Made from premium grade anodized aluminum with a lever shaped profile ensuring optimal leverage in addition to work piece accessibility
HUHAO Straight 45 Degree V Groove Engraving Tool Carbide CNC Router Bits 1/8 Inch Shank 0.1mm Tip 5PCS
$12.98
$18.82
Amazon.com
Last update was on: September 25, 2023 5:39 am
- Material: hard carbide
- 45 degree engraving router bits, CNC router bit 1/8 inch shank, 2 Flute straight V90 Bit, CNC machine cutting, Woodworking, V shaped
- With a unique mirror grinding processing for cutting edge produces an excellent surface finish. Reduce chance of burr and deviation.
- Perfect choice for carving and engraving details. Mainly used for the engraving and marking of wood, MDF, aluminum, acrylic.
