Top 10 Iron On Hurricane Logo Patch

ZEGIN supply the high quality fashion embroidered decorative accessories.

USAGE
ZEGIN patch can be iron on or sewn on. If you choose iron on, the Iron in your home is available. The process is easy and fast, you can have your own style garments with our patch in 15 seconds.
1, Prepare your patch and preheat the iron (160¡æ-200¡æ).
2, Make your clothes smooth and choose the position to iron. A cloth is welcomed to put between the iron and patch/clothes to protect your clothes. You can also turn over the cloth to Iron. (The glue can be easier melt.)
3, Press the Iron for 15 seconds.
4, When the patch cool down, check it. If not ironed, repeat the steps.

SAFETY
As to the patch, the embroidery thread, heat seal glue and the fabric have been passed the harmful substances test. Our patch is safe.

PACKING
There are 1 piece embroidered patch packed.

Instructions

Garment should be clean & freshly laundered for attaching patch. Here are the basic instructions for setting our iron on patches.

Step 1: Set iron to “COTTON”, 400 degrees, for one minute.
Step 2: Thoroughly iron area of garment where patch will be placed.
Step 3: Spray water light on the back. Position your patch where you desire, Place it on garment, embroidery facing up.
Step 4: Place cloth or light towel over patch and using a slow circular motion, press firmly for 30 seconds.
Step 5: Let cool for one minute. If edge of patch can be lifted, repeat step 5. Note: You can either sew on or iron on all patches that we sell.

Instructions

Garment should be clean & freshly laundered for attaching patch. Here are the basic instructions for setting our iron on patches.

Step 1: Set iron to “COTTON”, 400 degrees, for one minute.
Step 2: Thoroughly iron area of garment where patch will be placed.
Step 3: Spray water light on the back. Position your patch where you desire, Place it on garment, embroidery facing up.
Step 4: Place cloth or light towel over patch and using a slow circular motion, press firmly for 30 seconds.
Step 5: Let cool for one minute. If edge of patch can be lifted, repeat step 5. Note: You can either sew on or iron on all patches that we sell.

Instructions

Garment should be clean & freshly laundered for attaching patch. Here are the basic instructions for setting our iron on patches.

Step 1: Set iron to “COTTON”, 400 degrees, for one minute.
Step 2: Thoroughly iron area of garment where patch will be placed.
Step 3: Spray water light on the back. Position your patch where you desire, Place it on garment, embroidery facing up.
Step 4: Place cloth or light towel over patch and using a slow circular motion, press firmly for 30 seconds.
Step 5: Let cool for one minute. If edge of patch can be lifted, repeat step 5. Note: You can either sew on or iron on all patches that we sell.

Instructions

Garment should be clean & freshly laundered for attaching patch. Here are the basic instructions for setting our iron on patches.

Step 1: Set iron to “COTTON”, 400 degrees, for one minute.
Step 2: Thoroughly iron area of garment where patch will be placed.
Step 3: Spray water light on the back. Position your patch where you desire, Place it on garment, embroidery facing up.
Step 4: Place cloth or light towel over patch and using a slow circular motion, press firmly for 30 seconds.
Step 5: Let cool for one minute. If edge of patch can be lifted, repeat step 5. Note: You can either sew on or iron on all patches that we sell.

Instructions

Garment should be clean & freshly laundered for attaching patch. Here are the basic instructions for setting our iron on patches.

Step 1: Set iron to “COTTON”, 400 degrees, for one minute.
Step 2: Thoroughly iron area of garment where patch will be placed.
Step 3: Spray water light on the back. Position your patch where you desire, Place it on garment, embroidery facing up.
Step 4: Place cloth or light towel over patch and using a slow circular motion, press firmly for 30 seconds.
Step 5: Let cool for one minute. If edge of patch can be lifted, repeat step 5. Note: You can either sew on or iron on all patches that we sell.

Instructions

Garment should be clean & freshly laundered for attaching patch. Here are the basic instructions for setting our iron on patches.

Step 1: Set iron to “COTTON”, 400 degrees, for one minute.
Step 2: Thoroughly iron area of garment where patch will be placed.
Step 3: Spray water light on the back. Position your patch where you desire, Place it on garment, embroidery facing up.
Step 4: Place cloth or light towel over patch and using a slow circular motion, press firmly for 30 seconds.
Step 5: Let cool for one minute. If edge of patch can be lifted, repeat step 5. Note: You can either sew on or iron on all patches that we sell.

Cloth stickers that can be ironed are recommended to be more firmly sewn by hand after ironing!

[Application Method of Cloth Paste Ironing] Generally, the area is not large and the thickness is about 0.1cm.
The fabric has a wide application range and is easy to use.

1. Keep the back clean before ironing, and adjust the temperature to a temperature suitable for clothes according to the use method of the iron.

2. Place the cloth in the desired position (don’t tear off the glue) and press it back and forth for a few times, usually about 10 seconds

3. In order to prevent scalding, a layer of thin cotton cloth can be put on the cloth patch (it must be cotton, not faded cloth).
After ironing, check the edges to see if they are well ironed, and iron the edges a few times more.

4. Temperature: A bit thick, must be higher temperature, hot a little longer time.
For a particularly thick cloth patch, you can burn the back a few more times.

5. Pay special attention: For cloth stickers with sequins or bright surface (since sequins are plastic products), be sure to pad a layer of cloth and iron it at low temperature (below 130℃), or directly use steam iron.
Or put a layer of wet cloth on it. In order to avoid melting of plastic sheets caused by too high a temperature.

6. SUGGESTION: After ironing, use a needle and thread to sew a few stitches on the side of the cloth to make it stronger and more comfortable.

7. If you don’t have an iron in your home, you can also use the same color thread to sew the cloth on your clothes directly.

LiZMS Brand

—————————————————————-
HEART EYES
—————————————————————-
Heat seal or sew appliques are easy to place on a garment.

High Quality
Iron-On or Sew Patch with Detailed Embroidery to Any Garment. Long Lasting, Durable with Superior Premium High Thread Rayon Quality.

Apply To
All Patches are Die-Cut & Rayon Material. With Heat Sealed Backing or Easy Sawing. Bright Colors, & Intricate. Incredible Designs, for Jackets, Vests, Backpack, Jeans, Cloths, Hats, Uniforms, Scarves, Bags, Scrabooking, Luggages & Many More.

Quantity
3 Patches

Measures
4.3 x 4 cm

APPLICATION INSTRUCTIONS;
(1) Preheat iron to “cotton” setting. DO NOT USE STEAM DURING APPLICATION.
(2) Position design and cover with thin pressing cloth.
(3) Press straight down with constant pressure for 25 seconds. DO NOT IRON BACK AND FORTH.
(4) Allow to cool thoroughly before using. Heat seal to cotton and cotton polyester fabrics.
*** For some patches are overlock, we recommend that you should sew.
DO NOT APPLY TO RAYON, NYLON OR TRIACETATE FABRICS.
These designs are machine washable and dry cleanable. Manufacturer recommends delicate cycle of washing machine and line dry.

LiZMS Brand

As a patch lover like me, these patches are a must have.

Why Choose Us

★High Quality Fabric
★100% 3D Embroidery
★Comfortable
★Durable
★Tough
★Easy to Remove and Wash
★Looped Backing Included
★Perfect Match
★Reasonable price and fast delivery
★No-Hassle After-sales Service

What You Will Get

NFL San Francisco 49ers Patch x2

How to use(ironing)

1.Keep the back of the patches and the repaired clothing clean before use,
2.The back of the patches comes with a transparent adhesive film ( do NOT tear off the adhesive), and the household flat iron is adjusted to the cotton file (120-150 degrees);
3.Place the patches in the position that needs to be modified, and press it back and forth a few times, usually for about 15 seconds;
4.In order to prevent burns, it is recommended to put a thin cotton cloth on the cloth (can be an old T-shirt, must be cotton does not fade!! Towels are not available), check if the edges are hot after ironing, on the edge Iron a few more times;
5.It is also necessary to determine the ironing time according to the thickness of the cloth. The thicker cloth is longer for ironing. After ironing the front, press a few times on the back of the clothes;
6.After the temperature is cooled, the processing is completed.

·Due to the production process, defective patches may appear, although the probability is extremely low. If this happens, Please remind us us and give us a chance to make up.

☆Great products without question. Click the Add to Cart button at the top right of this page to place your order now, and you will be a fever class patch lovers in your circle.

☆Enjoy the Best Customer Service, 100% Money Back Guarantee & Free No-Hassle Lifetime After-sales Service. Just Make Your Life More Comfortable and Convenient!

☆Qduoduo Customer Service Team

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Iron On Hurricane Logo Patch, eg:

• What are Top 10 Iron On Hurricane Logo Patch for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Iron On Hurricane Logo Patch to buy?
• What are Top Rated Iron On Hurricane Logo Patch to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Iron On Hurricane Logo Patch?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Iron On Hurricane Logo Patch.
• Before deciding to buy any Iron On Hurricane Logo Patch, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Iron On Hurricane Logo Patch and What you should consider when buying the Iron On Hurricane Logo Patch and Where to Buy or Purchase the Iron On Hurricane Logo Patch. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Iron On Hurricane Logo Patch of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Iron On Hurricane Logo Patch.