homehealthfamily 
Best results for jobber length drill bit
MaxTool 29 Piece Twist Jobber Length Drill Bit Set; 8% Cobalt High Speed Steel HSS M42; 135° Split Point; Fully-Ground; JBS42G10R029P
$99.99
$114.99
Amazon.com
Last update was on: May 22, 2024 12:34 am
- 29pcs jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- Premium Quality 8% Cobalt High Speed Steel M42 (Hardness up to HRC68) provides all drills long tool life
- Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace
- Golden surface finish resists corrosion and increases the hardness of the drill bits
- 135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole
1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$15.05
$18.21
Amazon.com
Last update was on: May 22, 2024 12:34 am
- JOBBER LENGTH: 1/8-Inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
1/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$12.42
$14.28
Amazon.com
Last update was on: May 22, 2024 12:34 am
- JOBBER LENGTH: 1/16-Inch cutting diameter, 7/8-Inch flute length, 1-7/8-Inch overall length, 118 degree point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardess is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
COMOWARE Cobalt Drill Bit Set- 115Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Metal Indexed Storage Case, 1/16" – 1/2"
$179.99
$264.59
Amazon.com
Last update was on: May 22, 2024 12:34 am
- 115 PIECES INCLUDED: 29pcs Fractional Size:1/16” to 1/2” in 1/64th increments
- 26pcs Letter Size: A To Z
- 60pcs Numbered Size: #1 To #60.
- HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance.
- PRECISE 135° SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.
- PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
DRILLFORCE 1/8 inch, HSS Twist Drill Bits,5% Cobalt Jobber Length Twist Drill Bits,10pcs in Plastic Bag, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc. (1/8)
$8.99
$12.86
Amazon.com
Last update was on: May 22, 2024 12:34 am
- Cobalt drill bits: Classic 5% Cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Hardness: 5% Cobalt drill bits’ Rock wall Hardness Level HRC 65-66.
- Package & Size: 10 Pieces drill bits in a plastic bag, Diameter 1/8 inch, Total length 2-3/4 inch, Working length 1-5/8 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Stainless Steel, Not For Use On Concrete / Masonry. Perfect match for workshop or service vehicles.
Chicago Latrobe 550 Series Cobalt Steel Jobber Length Drill Bit Set with Metal Case, Gold Oxide Finish, 135 Degree Split Point, Inch, 29-piece, 1/16" – 1/2" in 1/64" increments
Migiwata 5/16 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs – Jobber Length and Straight Shank – Extremely Heat Resistant – Suitable for Repeated Drilling in Stainless Steel
$18.99
$24.88
Amazon.com
Last update was on: May 22, 2024 12:34 am
- Cobalt Steel - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- For Stainless Steel - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
MaxTool 60 Piece Jobber Length Drill Bit Set; High Speed Steel HSS M2; Number Wire Gauge 1 to 60; Golden Surface; Fully Ground; JBS02G10R60
$39.35
$47.61
Amazon.com
Last update was on: May 22, 2024 12:34 am
- 60pcs jobber length drill bits includes wire gauge sizes 1# to 60
- # Quality High Speed Steel M2 provides all drills long tool life
- Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace
- Golden surface finish resists corrosion and increases the hardness of the drill bits
- 135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole
IRWIN Tools 63112ZR 3/16-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 12
$15.76
$18.91
Amazon.com
Last update was on: May 22, 2024 12:34 am
- M-35 Cobalt Construction for Durability in abrasive materials
- Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking
- Straight shank works in both keyed and key-less drill chucks
- Heavy duty spiral flute design produces faster chip ejection
- Shorter cutting lips reduce torque for drilling in high tensile strength materials
Chicago Latrobe 150 Series High-Speed Steel Jobber Length Drill Bit Set with Metal Case, Black Oxide Finish, 118 Degree Conventional Point, Wire Size, 60-piece, #60 – #1
Pack of 12, 5/64-Inch Titanium Nitride Coated Drill Bit, High Speed Steel, Jobber Length, for Metal, Plastic, Wood
$11.29
$15.69
Amazon.com
Last update was on: May 22, 2024 12:34 am
- JOBBER LENGTH: 5/64-Inch cutting diameter, 1-Inch flute length, 2-Inch overall length, 118 degree point, straight shank
- MADE FROM PREMIUM HIGH-SPEED STEEL: peform better because of its well-balanced toughness
- TITANIUM NITRIDE COATING: add lubricity and hardness, enhancing chip flow, finish hole quality and drill life
- APPLICATION: offer best durability and speed for repetitive drilling in medium and softer materials, soft metal, PVC and wood
Huot 11700 Combination Jobber Length Drill Bit Index for Sizes 1/16" to 1/2" in 1/64" Increments, A to Z, and #1 to #60
15 Pieces HSS Drill Bits Set, SVY 15 PCS High-speed steel(HSS) Fractional Jobber Length Drill Bits Set
$18.69
$25.61
Amazon.com
Last update was on: May 22, 2024 12:34 am
- Constructed of M-2 high speed steel for the best combination of strength, heat resistance and wear.
- Fully ground, 135-degree split point minimizes walking and slips,Hss/M2, ASME B94.9, 11M Jobber length.
- Variety of the most common drill bit sizes, range from 1/16" to 3/8".
- Perfect for drill presses and power drills, working on metals, woods and plastic.
- Easy Storage: Comes in a heavy-duty blow-molded plastic carrying case that includes labeled compartments and a carrying handle so you can take it with you anywhere.
MaxTool 29 Piece Twist Jobber Length Drill Bit Set; High Speed Steel HSS M2; 135° Split Point; Fully-Ground; Bright 3-Flat on Shank; JBS02W13R029P
Amazon.com
Last update was on: May 22, 2024 12:34 am
- 29pcs jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- Quality High Speed Steel M2 provides all drills long tool life
- Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace
- 3-Flat on shank prevents "Spinning" in chucks and maximizes security for precise holes
- 135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole
DRILLFORCE HSS Jobber Length 10 PCS,19/64" x 4-3/8"Titanium Coated Twist Drill Bits, Metal drill, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc. Pack In Plastic Bag (19/64)
$13.00
$14.43
Amazon.com
Last update was on: May 22, 2024 12:34 am
- Titanium Coated: Classic 4241 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Strength & Hardness: Made with HSS 4241 steel, Rock wall Hardness Level HRC 60-62.
- Package & Size: 10 Pieces in a plastic bag, Diameter 19/64 inch, Total length 4-3/8 inch, Working length 3-1/16 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
Chicago Latrobe 150ASP Series High-Speed Steel Jobber Length Drill Bit Set with Metal Case, Heavy Duty, Black Oxide Finish, 135 Degree Split Point, Inch, 15-piece, 1/16" – 1/2" in 1/32" increments
Amazon.com
Last update was on: May 22, 2024 12:34 am
- Set of 15 jobber length drill bits includes inch sizes 1/16" through 1/2" in 1/32" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Extra thick web for increased strength and rigidity compared to standard drill bits
