homehealthfamily 
Best results for pipe tap chart drill
uxcell Machine Tap 1/4-18 NPS Straight Pipe Thread 4 Flutes High Speed Steel
$12.89
$14.57
Amazon.com
Last update was on: May 13, 2024 7:58 pm
- Thread Size: 1/4-18 NPS
- Thread Length: 30mm / 1.18 inch
- Shank Side Width: 8.8mm / 0.35 inch
- Material: HSS (High Speed Steel)
- Total Length: 94mm / 3.7 inch
- Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
uxcell Machine Tap 9/16-12 BSW Thread Pitch H2 4 Straight Flutes High Speed Steel
$13.31
$19.30
Amazon.com
Last update was on: May 13, 2024 7:58 pm
- Thread Size: 9/16-12 BSW
- Shank Side Width: 9mm / 0.35 inch
- Thread Length: 32mm / 1.26 inch
- Material: HSS (High Speed Steel)
- Total Length: 95mm / 3.74 inch
- Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
Stainlesstown Nut Bolt Thread Gauge (Blue)
$8.95
$10.47
Amazon.com
Last update was on: May 13, 2024 7:58 pm
- Measures diameter, thread pitch & length of nuts, bolts & screws
- Measures fractional bolts from size #4 to 1" up to 7" long
- Measures metric bolts & screws from size 3mm to 22mm
- Made of very durable 1/4" thick hard plastic
- 1/4" thick x 8-3/4" Long x 3-3/8 Wide
Screw Chek’r SAE/ Inch Screw Thread Size Gauge (No. 1 to 5/16) 1/8 Inch Heavy Gauge Steel Screw Checker, Made in USA
$15.05
$21.97
Amazon.com
Last update was on: May 13, 2024 7:58 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do it yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for sizes ranging from No. 1 through 5/16 inch in NC, NF, and NS pitches. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
uxcell Metric Hand Tap M20 Thread 1 Pitch 4 Straight Flutes H2 Alloy Tool Steel 1 Pair
Nut & Bolt Thread Checker (Inch & Metric)
$27.30
$39.59
Amazon.com
Last update was on: May 13, 2024 7:58 pm
- Each size has a nut and bolt checker on the same gauge. 26 male/female gauges - 14 inch & 12 metric.
- Thread sizes are permanently stamped onto each gauge (inch in red, metric in white)
- Inch gauges are clear zinc plated, metric gauges are black oxide.
- The individual gauges rotate freely on the wire cable for fast thread verification
- Wire cable with loop for convenient hanging
IRWIN Titanium-Nitride Coated Metal Index Drill Bit Set with Case, 29-Piece, 3018003
$131.55
$157.86
Amazon.com
Last update was on: May 13, 2024 7:58 pm
- Titanium-coated nitride drill bits last longer and feature a cutting edge that stays sharp
- 135° split-point tip starts drilling immediately and helps eliminate walking
- IRWIN drill bits are great for repetitive metal drilling with portable drills and for use in stationary drill presses
- Includes 1/16" through 1/2" drill bit sizes in 1/64" increments
- Titanium nitride coating extends cutting edge life up to 6x
Thexton THE432 Universal Thread Gauge
Anderson Metals Brass Hose Fitting, Connector, 5/8" Barb x 3/4" Male Pipe
$7.17
$8.17
Amazon.com
Last update was on: May 13, 2024 7:58 pm
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Relative softness of brass threading when compared to other metals allows for a tight seal
- Barbed shank provides secure connection to hose
- Temperature range from -32 to +140 degrees F
- Intended for use with hose clamp or crimp type ferrule (sold separately)
- Note: Kindly refer size chart image before purchase
