homehealthfamily 
Best results for tin snips for drill
DEWALT DWASHRIR Impact Ready Shears Attachment
$48.17
$62.62
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Able to cut up to 18GA material
- 360 degree swivel head for maneuverability
- Connects via standard 1/4-inch hex shank
- Compatible with most 18V-20V impact driver and drills
- Able to cut up to 18GA material
- Connects via standard 1/4-inch hex shank
Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment
Malco TSCM Corrugated Metal Turbo Shear
$104.99
$130.19
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Attaches to a drill or impact driver you already own
- Make fast cross-cuts, lengthwise trim cuts in large or small metal corrugated patterns
- 360 degree rotating head for optimum tool clearance and material flow
- Able to cut curves and straight lines
- Made in the USA
Double Head Sheet Metal Cutter, Versatile Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel, Perfect for Home DIY and Car Repair
$32.99
$44.21
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- ►Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- ►360 degree double cutting head to cut straight line, curve line and circles
- ►HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- ►Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Malco M14A 14-Inch Straight Cut Aluminum Snip
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear
$43.90
$50.05
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
- Powerful 4.0 amp motor
- 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
- Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear
$94.49
$112.44
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Made in the USA
- Replaceable blades
- Turns your power drill into a heavy duty power shear
- Inserts into the chuck of a 14.4 volt or larger A/C or cordless drill
- Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct
- Navigates tight patterns and square cuts
Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill Attachment
$90.60
$115.06
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Easily cuts auto body panels
- Wide opening jaws navigate thick plastic bumper profiles
- Perfect for cutting rocker panels and layered metal
- Cuts straight and to the left including round and square auto body patches
- Replacement blades available
Antrader Double Head Sheet Nibbler Metal Cutter Hole Saw Drill Attachment
$15.49
$21.38
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Use for : Brass Aluminum Stainless
- Overall Size: 18 x 5.1 x 7.8cm / 7" x 2" x 3" (L*W*H)
- Excellent cutting effect without any burrs and edges. Capable of cutting any kind of thin metal and sheets:Iron Sheet,Stainless Steel Sheet,Copper, Aluminum Sheet,Plastic/Fiberboard,etc.
- Cutting Diameter: 7.4mm / 0.3"
- Shank Diameter: 27mm / 1.06"
- Material: Metal, Plastic
DEWALT DCE151TD1 20V MAX XR Cordless Cable Stripper Kit
$291.00
$372.48
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Depth gauge consistently strips cables up to 4"
- Variable speed trigger with reverse for speed control
- E-clutch system helps the user maintain control of the tool if it becomes jammed
- Quick release bushings allow you to quickly change bushings for each Cable size
- Strips #6 - 750 MCM cu/900 MCM al Cable
MulWark 14-Gauge Double-Headed Sheet Metal Nibbler Cutter Tool Kit for Corrugated Metal Roof & Façade Construction| High Cutting Capacity 1500-3000 rpm Drill Attachment with Spare Replacement Parts
$33.99
$47.93
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- HIGH CUTTING PERFORMANCE: Glide through materials up to 2mm/ 14gauge and create a precise, burr-free edge with excellent cutting performance
- Capable of cutting any thin metal and sheets: iron sheet, stainless steel sheet, aluminum, copper, brass, formica, plastic, fiberglass, complex profiles, pipes, powder coated materials, etc.
- PERFECT ALTERNATIVE: As an alternative of power/ air nibbler or metal shear, this extension set serves exactly the same purpose only with easier control, lower cost and higher compatibility. These work perfectly with any standard electric or pneumatic drill with speed of 1500rpm-3000rpm
Lnchett Double Head Sheet Nibbler Metal Cutter, Quality Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel
$45.99
$60.71
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- ►Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- ►360 degree double cutting head to cut straight line, curve line and circles
- ►HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- ►Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Dicfeos Double Head Metal Sheet Nibbler Cutter with Circle Cutting Accessories, Drill Attachment with Wrench & Parts, Maximum 14 Gauge Steel
$35.99
$52.91
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Fitting effortlessly into any standard drill. It can glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edge
- Sheet metal, corrugated material, pipes, Complex profiles, powder coated material, stainless steel, copper, aluminum, Formica, plastic, fiberglass. It is so versatile and it can handle it all with ease
- Cut in any direction and follow the profile of the material. Gutters, roof sections, Complex shapes or stencils can be cut with precision as it can move anywhere within 360 degrees.
Double Headed Sheet Metal Nibbler, REXBETI Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit, Perfect for Straight Curve and Circle Cutting (gold)
$35.99
$43.19
Amazon.com
Last update was on: May 18, 2024 7:42 pm
- Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- 360 degree double cutting head to cut straight line, curve line and circles
- HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
